1. <<< **NEREGISTRIRANI čLANOVI TRENUTNO NEMOGU SKIDATI DATOTEKE I VIDJETI LINKOVE,ZA PRISTUP TREBA SE REGISTRIRATI!** >>>
    Dismiss Notice

Latest Bootloader For Venton Unibox HD3

Rasprava u 'Venton UNiBOX Bootloaders' pokrenuta od beli1910, 9. Kolovoz 2012..

  1. beli1910

    beli1910 Administrator

    Pridružen(a):
    21. Veljača 2009.
    Poruka:
    11,911
    Lajkova:
    14,312
    Spol:
    Muškarac
    Interesi:
    Sat hobi
    Grad:
    Metlika-Slo
    This content is protected
     

    Privici:

  2. zvonko67

    zvonko67 New Member

    Pridružen(a):
    6. Ožujak 2011.
    Poruka:
    7,124
    Lajkova:
    5,433
    Spol:
    Muškarac
    Grad:
    crosat umirovljenik
    New Bootloader for Unibox HD3 {23SET12}


    New Bootloader for Unibox

    How to flash new CFE ?

    Just flash it like normal image. After installation box will bootup with new bootloader.

    FLASHING WITH CONFIRMATION:
    VENTON-HDx Flashing Image using USB Pen Drive.
    1. Unzip compressed file.
    2. Copy the "venton-hdx" folder to a USB Pen Drive.
    3. Power off receiver with the mains switch on the rear.
    4. Connect USB Pen Drive.
    5. Power on receiver with the mains switch on the rear.
    6. Press the ARROW UP Button on the front panel to flash.
    Update in progress.
    The receiver will reboot automatically after update.

    FLASHING WITHOUT CONFIRMATION:
    VENTON-HDx Flashing Image using USB Pen Drive.
    1. Unzip compressed file.
    2. Copy the "venton-hdx" folder to a USB Pen Drive.
    3. Change name of the file in folder "venton-hdx" file "noforce" to "force"
    4. Power off receiver with the mains switch on the rear.
    5. Connect USB Pen Drive.
    5. Power on receiver with the mains switch on the rear.
    6. Reciver will automatically flash.
    Update in progress.
    The receiver will ask You to remove USB and reboot box by switchng it on and off after update.

    Venton HD3
     

    Privici: