Šta je novo?
CroSatelite.com

Satelitski Forum - digitalna televizija i nove tehnologije, domaći i strani pay TV kanali i kanali iz ex-yu zemalja, domaće kabelske DTH IPTV i ostale Pay TV i uz sve ovo mjesto odlične zabave!

  • <<< **NEREGISTRIRANI čLANOVI TRENUTNO NEMOGU SKIDATI DATOTEKE I VIDJETI LINKOVE,ZA PRISTUP TREBA SE REGISTRIRATI!** >>>

Last Oscam for DM500HD, DM800, DM7025, DM8000 & VU

josip11

crosatelite umirovljenik
Administrator
Oscam1.20 svn7509

- Changeset [7509] by theparasol
Reworked the cooldown function (it was totally broken!)

Warning: oscam uses ratelimitecm as slots, nothing to do with actual count of real ecms
We should better rework that in a future rev as slots and slottime.
An extra maxecm and maxecmtime should be implemented to count actual ecms within a certain timespan.
For now the cooldown works again with slots and slottime (as entered in ratelimitecm and ratelimitseconds)

Setup phase:
The reader fills the slots, as the last is filled in and nothing can be freed it will give you a grace time of cooldown delay in which slots are being ingnored.
After the delay time its automatically followed by the cooldown time where the slots and timeframes are being maintained.
If the cooldown time is done, the setup phase will begin again.

Take into account that oscam uses 20 slots max (hardcoded!) so it makes no sence to even use a ratelimitecm value >20

To be continued...

thanks LePouSAT
 

Prilozi

beli1910

Administrator
04.10.2012 Oscam1.20 svn7606

- Changeset [7606] by theparasol
Oscam cccam client -> oscam cccam server protocol

Fixed:

Oscam hexserial preleading 00 bug
Oscam seca emm no UQ EMM's are send from client to server

Viaccess / Betacrypt / Irdeto needs to be tested and reported!

thanks LePouSAT
 

Prilozi

josip11

crosatelite umirovljenik
Administrator
5.10.2012 Oscam1.20 svn7613

- Changeset [7613] by theparasol
CDS NL 0100:00006a needs ecmpid to be registered in loadbalancer.
On some channels, mostly SD from old settopbox package this provider
has two entries in the PMT for 0100:00006a, only difference is ECMPID.
They did this dirty trick to support old settopboxes that had to be replaced otherways.
One ECMPID is old seca2 system, the other is new nagravision the "seca3"

thanks LePouSAT
 

Prilozi

zvonko67

New Member
Oscam1.20 svn7754

- Changeset [7754] by gf
config: Put an extra new line between services when writing oscam.services.

The extra empty line doesn't hurt and improves readability. Now
when you save oscam.services file from webif instead of

[blablub]
caid = 1702
provid = 000000
srvid = 0083,0081
[blablub1]
caid = 1702
provid = 000000
srvid = 0084,0080

you will get

[blablub]
caid = 1702
provid = 000000
srvid = 0083,0081

[blablub1]
caid = 1702
provid = 000000
srvid = 0084,0080

Reported by beneee.

thanks LePouSAT
<!-- / message --><!-- attachments -->
 

Prilozi

zvonko67

New Member
Oscam1.20 svn7759

- Changeset [7759] by corsair
added lb betatunnel patch. Thx to TNe-Two !
- Changeset [7758] by theparasol
Tryfix for crashing 7556 (?)
- Changeset [7757] by theparasol
Tryfix: inverse convention doesnt apply to ATR!
- Changeset [7756] by theparasol
Fixed: Guardtime was display several times, only first was correct and valid
- Changeset [7755] by theparasol
Fix for inverse card conventions

thanks LePouSAT
<!-- / message --><!-- attachments -->
 

Prilozi

zvonko67

New Member
24.10.2012 Oscam1.20 svn7798

-Changeset [7798] by theparasol
Internal readers have drivers that do guardtiming on their own.
If we add the same guardtime as for external readers the ecm time will raise.
- Changeset [7797] by theparasol
Tryfix for T0 protocol tnx to Irata for supplying detailed logs!
- Changeset [7796] by theparasol
Corrected guardtime on T1 protocol, its standard not 2 (=T0) its 12!

thanks LePouSAT
<!-- / message --><!-- attachments -->
 

Prilozi

mamba65

Administrator
Oscam-svn8040-mips-tuxbox-webif-Distribution

Version: oscam-1.20-unstable_svn-r8040


Web interface support: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
LCD support: no
LED support: no
IPv6 support: no
Cache exchange support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: yes
gbox: no
radegast: yes
serial: yes
constant CW: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no



 

Prilozi

mamba65

Administrator
anfänger.gif
Oscam-1.20-unstable_svn-r8077

Timeline

Kod:
Version:        oscam-1.20-unstable_svn-r8077

Web interface support:         yes
Touch interface support:       yes
SSL support:                   yes
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     yes
camd 3.5 UDP:                  yes
camd 3.5 TCP:                  yes
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       yes
gbox:                          yes
radegast:                      yes
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             yes
cardreader_mp35:               yes
cardreader_smargo:             yes
cardreader_pcsc:               yes
cardreader_smartreader:        yes
cardreader_db2com:             yes
cardreader_stapi:              no

 

Prilozi

mamba65

Administrator
p.gif

Oscam_1.20-rev-8112-oe1.6
Oscam_1.20-rev-8112-oe2.0

Timeline

Kod:
Version:        oscam-1.20-unstable_svn-r8112

Web interface support:         yes
Touch interface support:       yes
SSL support:                   yes
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     yes
camd 3.5 UDP:                  yes
camd 3.5 TCP:                  yes
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       yes
gbox:                          yes
radegast:                      yes
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             yes
cardreader_mp35:               yes
cardreader_smargo:             yes
cardreader_pcsc:               yes
cardreader_smartreader:        yes
cardreader_db2com:             yes
cardreader_stapi:              no

 

Prilozi

18.01.2013 Oscam1.20 svn8119

- Changeset [8119] by depp0n
take reader->auprovid into account when starting emm filter
cryptoworks & viaccess: emm support for multiple cards for same channel and same caid but different provid
viaccess: return written instead of error after writing an emm to a card (even if the answer is not 90 00) .. otherwise some cards like 0500:040810 get valid updates, but oscam always returns error.
coolapi: removed emm workaround because it is no longer needed since the new filter handling in r8084
- Changeset [8118] by Admin
WebIf: Output revision correctly. The up-to-now used hash is used to refer to tickets, thus it creates a bit confusions in our tickets.

thanks LePouSAT
 

Prilozi

mamba65

Administrator
iBSwfZqjDfTei.jpg

Oscam-1.20-unstable_svn-r8142

Kod:
Version:        oscam-1.20-unstable_svn-r8142

Web interface support:         yes
Touch interface support:       no
SSL support:                   no
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     no
camd 3.5 UDP:                  yes
camd 3.5 TCP:                  yes
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       yes
ghttp:                         no
gbox:                          no
radegast:                      yes
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             no
cardreader_mp35:               no
cardreader_smargo:             yes
cardreader_pcsc:               no
cardreader_smartreader:        no
cardreader_db2com:             no
cardreader_stapi:              no
click_0054.gif
 

Prilozi

30.01.2013 Oscam1.20 svn8238

- Changeset [8238] by gf
Remove dead code.
- Changeset [8237] by gf
webif: Prevent crash due to race in setting cwlastresptimes_last variable.
Thanks for malakudi for finding the bug.
- Changeset [8236] by depp0n
oscam-config-reader.c:
*changed default value for cool_timeout_init to 0 which means oscam uses the calculated value from atr
*changed default value for cool_timeout_after_init to 0 which means oscam uses the calculated value from atr
protocol_t0.c:
*fixed receive timeout which got mixed-up in r8136

thanks LePouSAT
 

Prilozi

mamba65

Administrator
up-mb.jpg


Oscam-1.20-unstable_svn-r8282

Timeline


Kod:
Version:        oscam-1.20-unstable_svn-r8282

Web interface support:         yes
Touch interface support:       yes
SSL support:                   yes
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     yes
camd 3.5 UDP:                  yes
camd 3.5 TCP:                  yes
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       yes
ghttp:                         no
gbox:                          yes
radegast:                      yes
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes
Griffin:                       yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             yes
cardreader_mp35:               yes
cardreader_smargo:             yes
cardreader_pcsc:               yes
cardreader_smartreader:        yes
cardreader_db2com:             yes
cardreader_stapi:              no
 

Prilozi

Top