Šta je novo?
CroSatelite.com

Satelitski Forum - digitalna televizija i nove tehnologije, domaći i strani pay TV kanali i kanali iz ex-yu zemalja, domaće kabelske DTH IPTV i ostale Pay TV i uz sve ovo mjesto odlične zabave!

  • <<< **NEREGISTRIRANI čLANOVI TRENUTNO NEMOGU SKIDATI DATOTEKE I VIDJETI LINKOVE,ZA PRISTUP TREBA SE REGISTRIRATI!** >>>

Wetek 2 Cam

pozdrav do svima moze malo pomoc oko wetek 2 play dali ovaj box poderzava instalacija multics? i do koje verzije ako neko je probao posto zelim kupiti ovaj box posto ima podersku enigma 2 android i mpeg4, se dvoumim oko mag250 za iptv jer bolji ? moze nesto free iptv da se gleda sa mag250 ovaj mag video sam slabe perfomance ima ram memorija na aliexpress ima neke boje boxes sa 2 gb ram 16gb rom wireless keyboard i sa forever iptv za 120$ malo sam zbunet neznam koja je najbolja solucija sve dreamboxe vu solo su mpeg2 nemaju podersku za trikolor tv
 
Poslednja izmena:

SATmax

Super Moderator
- Na svaki Enigma2 ide multics ako znas sve podesiti da radi ok.
- Najbolja verzija i jedina stabilna koja radi na Enigma2 je MultiCS r77
- Na MAG mozes samo IPTV a na Enigma2 puno vise toga.
- Za MAG moras ubaciti portal od davatelja a to znaci da nema nista free za njega.
- Kloni se MAG-ova sa Aliexpress i sl. kineskih sranja shop-ova. Ako bas zelis MAG onda jedino kod Infomir web stranici pogledaj.
 
fala na odgovoru zelio sam samo da znam dali moze da se instalira primer ; multics r83 na wetek posto znam da multics je vezan sa procesorom
 

SATmax

Super Moderator
Ako imas mcs r83 za WeTek mozes probati. Neces puno dobiti ( ako uopce radi ) u odnosu na r77 koja odlicno radi i na mips i arm uredjajima.
 

SATmax

Super Moderator
Downladom zeljenog emulatora automatski se i instalira config. E sada ako treba za klijenta ( osnovno ) ima vec na forumu i isti je za sve verzije emulatora. A ako zelis server potrebno je dodatne opcije u config a to ovisi od lokalne karte koju imas.
 

brisel

Clan
Koristim alternative softcam manager. iz tog razloga posebno ubacujem config. probacu da nadjem, u poslednje vreme samo mi wicard radi kako treba, ncam veoma loše, ne znam zašto
 

SATmax

Super Moderator
NCam je gotovo isto sto i OsCam samo s malo naprednijim metodama za francuze.

ncam.conf
[global]
logfile = /dev/tty
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -20
maxlogsize = 1024
waitforcards_extra_delay = 200
preferlocalcards = 1
readerrestartseconds = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
lb_nbest_readers = 6
lb_nfb_readers = 6
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
failbantime = 1440
failbancount = 2

[cache]
delay = 100
max_time = 30
max_hit_time = 60
cacheexenablestats = 1
csp_allow_request = 0
csp_allow_reforward = 1
cacheex_cw_check = 05@032830:88:2000,05@030B00:88:2000
csp_block_fakecws = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 0500,0100,1811

[newcamd]
port = 12121@0D96:000004;12122@0624:000000
key = 0102030405060708091011121314
mgclient = 1

[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.4
stealth = 1

[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 117440512

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
request_mode = 1
delayer = 60
user = dreambox
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8181
httpuser = root
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
httputf8 = 0

ncam.server
[reader]
label = myemulator
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1

[reader]
label = myconstantcw
protocol = constcw
device = /usr/keys/constant.cw
group = 10

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = server1
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 2
#disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311

[reader]
label = server2
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 2
#disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311

[reader]
label = server3
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 2
#disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311

[reader]
label = server4
enable = 0
protocol = newcamd
device = host,port
key = 0102030405060708091011121314
user = user
password = pass
fallback = 1
group = 5

ncam.user
[account]
description = dvbapi
user = somename
group = 1,2
------------------------------------------------------
oscam.conf
[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

oscam.server
[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010,06AD
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000,000011,000014,0000FE;1010:000000;06AD:000000
group = 1

[reader]
label = biss
protocol = constcw
device = /etc/tuxbox/config/constant.cw
group = 1

oscam.user
[account]
user = dvbapi
group = 1
#caid = 09C4
#ident = 09C4:000000
au = 0
monlevel = 0
Ova OsCam config je za koristenje kljuceva.
 

brisel

Clan
Definitivno sam nešto loše posložio, Hvala u svakom slučaju, moraću sve da pobrišem i ispočetka :) :(
 

SATmax

Super Moderator
Nisi na osnovno odgovorio a to je da li zelis server, koristiti linije ili samo kljuceve.
 
Top